GANTRY MILLING MACHINE ENDURA® 300LINEAR

Economic entry-level solution for 5-axis universal machining

Gantry Milling Machine Endura® 300LINEAR

The ENDURA® 300LINEAR is a state-of-the-art 5-axis gantry milling machine, especially suitable for the 5-sided finishing of workpieces made of plastics, composite materials (CFRP, GFRP), model building block materials (Ureol) and aluminum, as well as for HSC machining of cast iron and steel materials.

The 5-axis portal milling machine is particularly characterized by its excellent machining area to footprint ratio.

 

This provides the customer with maximum travels within a minimum of floor space. This makes the machine particularly suitable for installation in workshops with limited space.

Thanks to the inherently rigid machine bed construction in monobloc design and the resulting even load distribution, no additional foundation is required.

A standard industrial hall floor is sufficient. Optimal accessibility ensures easy set-up, both in one- and two-place machining. FOOKE portal milling machines of the ENDURA® 300LINEAR series offer an economical entry into 5-axis universal machining due to their excellent price/performance ratio.

Features, technology and equipment:

  • Ultramodern GANTRY milling machine:
    Traversing overhead gantry in X direction.
  • Design of the machine:
    Machine bed (X-axis) made of solid cast iron, side parts, cross slide and portal (Y-axis) as welded steel construction, travel beam (Z-axis) made of cast iron.
  • Drive technology of linear axes:
    Water-cooled linear drives in the linear axes Y and Z, X-axis as rack and pinion - GANTRY drive and drive motors in MASTER - SLAVE alignment.
  • No foundation required: Due to the high rigidity of the machine bed, a standard industrial floor, approx. 300 mm thick, steel-reinforced, is sufficient for installation; a special foundation is not required. The machine is set up and aligned by fixators bolted to the hall floor
  • Measuring systems:
    The X axis is equipped with an indirect measuring system and the Y, Z and rotary axes are equipped with direct measuring systems.
  • Z-axis weight compensation:
    Highly dynamic pneumatic cylinders support the drive of the Z-axis.
  • Safety system of linear axes:
    The linear axes are equipped with a safety system that can brake and safely hold the axes in case of voltage loss.
  • Linear axes guides:
    The linear axes are equipped with hardened and ground, backlash-free pre-tensioned guide elements.

Self-supporting monoblock machine bed construction

Advantages at a glance.

  • Cost-effective introduction to 5-axis universal machining
  • Our classic in model and mold making
  • Large machining area at small footprint
  • Can be set up withour special foundation
  • Self-supporting machine bed construction in monoblock design
  • Very good accessibility
  • Individual configuration of axis lenghts
  • Traverse paths up to 7,000 x 3,500 x 1,500 mm
  • Range of materials: Plastics and composite, modeling board material, aluminum, cast, steel.

Gantry milling machine
ENDURA 300LINEAR

The economical all-rounder for the introduction to highly dynamic 5-axis universal machining.

Traverse paths                                             Feed rates

X-axis: 3,000 - 7,000 mm                             X-axis: 5 - 40,000 mm/min

Y-axis: 2,800 / 3,500 mm                             Y-axis: 5 - 65,000 mm/min

Z-axis: 1,200 / 1,500 mm                             Z-axis: 5 - 65,000 mm/min

 

Position accuracy                                          Position scatter

X-axis: 0.030 mm                                            X-axis: 0.020 mm

Y-axis: 0.020 mm                                            Y-axis: 0.010 mm

Z-axis: 0.020 mm                                            Z-axis: 0.010 mm

 

Acceleration up to 2.0 m/sec²

Fixed machine table with traversing overhead gantry in X-direction

Closed mounting table with T-slots

Wear-free, highly dynamic linear motors in the linear axes Y and Z

Direct measuring system in all linear and rotary axes

Safety systems and brakes in all axes.

Drive units consistently protected

Automatic tool changing systems

Minimum quantity spray dosing system

Coolant systems (wet operation)

Tool measuring systems

Workpiece measuring systems

Chips and dust disposal systems

Sound insulation enclosure

Online-Service

Download Produkt Brochure

GKN and FOOKE
HIGHLY EFFICIENT MACHINING OF WING FLAPS MADE OF CFRP

"FOOKE has highly qualified specialists who develop very economical solutions and implement them punctually and accurately. I rarely experience anything like this".

Hans-Jochen Platte, Production Manager

GANTRY MILLING MACHINE ENDURA® 907LINEAR

For milling, drilling, spindling, cutting and sawing of workpieces made of carbon fiber reinforced plastics.

Workpiece carrier storage incl. retrieval device for automatic workpiece carrier replacement.

High-performance milling head extraction incl. explosion protection

Fully enclosed machine

 

TOOL AND MOLD CONSTRUCTION. PROSPECT MOLD and FOOKE
Highest accuracy and excellent surface quality

"Compared to other milling machines we use, FOOKE machines are characterized by consistent, optimum geometric accuracy and the lowest percentage of unscheduled machine downtime. Even after more than 10 years of cooperation, FOOKE continues to convince and inspire us time and again".

Brandon Wenzlik, Prospect Mold

 

 

Profile milling machine ENDURA® PRO LINEAR

Specialist for stringer and profile processing
Highly dynamic 5-axis machining of long workpieces
Two-station component processing for loading and unloading parallel to the process
Encapsulated machining area by bullet-proof lamellas
Traverse paths up to 60,000 x 3,500 x 1,500 mm
Fully automatic movable clamping device / Flexible workpiece clamping
Typical sawing applications in profile processing
Rapid traverse: 65,000 mm/min.

 

Vehicle Design
Gantry milling machine ENDURA® 611Linear

Excellent surface quality with highly dynamic 5-sided machining of large 1:1 design models

Tool and mold construction
Compact gantry milling machine ENDURA® 704Linear

Highly dynamic finishing and high precision residual stock machining

CDM Tool & Manufacturing and FOOKE
TOOL AND MOLD CONSTRUCTION

"With the decision for a milling machine from FOOKE we have brought new momentum to our process. Less set-up time means more machining time. This enables us to carry out customer orders more economically and productively".

Mike Balderas, New Business & Marketing Manager

 

 

Plate milling machine ENDURA® 800LINEAR

Face milling machine for large aluminum precision plates
Finish machining in one milling process
Ergonomic loading
Surface quality < 0.4 µm
Milling tool up to Ø 3.100 mm

 

Rail Technology
Processing side walls, roofs and floor assemblies

Travelling column ENDURA® 1000LINEAR
Market leader in the processing of aluminum profiles in railway technology

Optionally with mechanical drive components or modern linear motor drives
Work area division - 3-place machining
Individual clamping concepts and fixtures on customer request
Operator's cabin for better process monitoring
Up to 90m X-travel

 

 

ALIMEX and FOOKE

"We have been working with Fooke for almost 15 years in a trustful cooperation. The quality and reliability of the machines and the very good service still convince us today. From the preparation of the offer to process adjustments and final acceptance of the machines, everything always runs smoothly. Innovative technologies and very good expertise also reliably secure our production processes. We appreciate Fooke as a reliable and customer-oriented partner".

Dr. Philip Grothe, CEO

 

Do you have questions about our products

Our sales team is at your service

Feel free to mail us or call us. We look forward to your questions and suggestions. You will receive an answer as soon as possible.

Tel.: +49 (0) 2861 / 8009 - 222