Compact Gantry Milling Machine

Our bestseller – proven since 2004 - continuously optimized

Gantry Milling Machine Endura® 700LINEAR

The ENDURA® 700LINEAR is a state-of-the-art 5-axis milling machine in compact gantry design with linear motor drive technology and 5 CNC-controlled simultaneous axes. The machine tool is particularly suitable for the efficient 5-sided finishing of workpieces made of plastics, composite materials (CFRP, GFRP), model building block materials (Ureol) and aluminum, as well as for the HSC machining of cast iron and steel materials.



The compact 5-axis milling machine ENDURA® 700LINEAR is characterized by high structural rigidity, features maximum dynamics and achieves highest accuracies. These properties result in optimum motion control and maximum productivity. Despite its compact design and small footprint, the 5-axis milling machine provides a large machining area.


The machine tool can also be set up without a foundation. With an acceleration of up to 3.5 m/sec², the FOOKE ENDURA® 700LINEAR is one of the most advanced high-speed milling machines.


Features, technology and equipment:

  • Highly dynamic GANTRY high-bed tool milling machine in compact design:
    Portal moving in X-direction.
  • Design of the machine:
    Machine bed made of solid cast iron, side walls (X-axis), cross slide and gantry
    (Y axis) as welded steel construction, walking beam (Z axis) made of cast iron.
  • No foundation required:
    Due to the inherently rigid machine bed, a standard industrial floor, approx. 300 mm thick, steel-reinforced, is sufficient for the installation; a special foundation, is not required. The machine is set up and aligned by fixators bolted to the hall floor.
  • Drive technology of linear axes:
    Water-cooled linear motors in the linear axes (X, Y and Z), X axis designed as a GANTRY axis pair.


  • Direct measuring systems:
    The linear and rotary axes are equipped with direct measuring systems.
  • Z-axis weight compensation:
    Highly dynamic pneumatic cylinders support the Z-axis drive.
  • Direct measuring systems:
    The linear and rotary axes are equipped with direct measuring systems.
  • Linear axes guides:
    The linear axes are equipped with hardened and ground, backlash-free pre-tensioned guide elements.
  • Thermal decoupling:
    Coating and cladding of relevant structural components with suitable insulation material and sheet metal. Negative influences of external temperature fluctuations on the positioning accuracy of the machine are significantly reduced through thermal decoupling.


Large machining area, small footprint

no foundation required

Advantages at a glance.

  • Our bestseller! Proven since 2004, continuously optimized
  • Large machining area, small installation surface, can be set up without foundations
  • Direct drive motors in all axes (linear and torque motors)
  • High structural rigidity, highest dynamics and best accuracies
  • Easy transport and short commissioning due to compact machine design
  • Consistently high precision due to temperature stability of the machine structure
  • 5-sided machining of all common automotive components
  • Highly efficient productivity in the machining of aluminum components
  • Modular design allows extension of X travel as XL version
  • Thermal decoupling of short-term temperature fluctuations by Thermo Guard
  • Travels up to 5,500 x 3,500 x 1,500 mm
  • Range of materials: plastics, CFRP/GFRP, modeling block material, aluminum, cast iron, steel


Compact Gantry Milling Machine

Compact portal milling machine with large machining area and small footprint.

Traverse paths

X-axis: 1,500 / 2,200 / 5,500 mm

Y-axis: 2,000 / 2,800 / 3,500 mm

Z-axis: 1,200 / 1,500 mm


Feed rates

X-axis: 5 - 65,000 mm/min

Y-axis: 5 - 65,000 mm/min

Z-axis: 5 - 65,000 mm/min


Acceleration up to 3.5 m/sec²


Position accuracy

X-axis: 0.015 mm

Y-axis: 0.015 mm

Z-axis: 0.015 mm


Position scatter

X-axis: 0.010 mm

Y-axis: 0.010 mm

Z-axis: 0.010 mm

Inherently rigid compact machine with closed machine bed

Wear-free, highly dynamic linear motors in all linear axes (X, Y and Z)

Direct measuring systems in all axes (X, Y, Z, C and A)

Safety systems and brakes in all linear axes (X, Y and Z)

Drive units consistently protected by bellows


Automatic tool changing systems

Minimum quantity spray dosing system

Coolant systems (wet operation)

Tool measuring systems

Workpiece measuring systems

Chips and dust disposal systems

Plane cover / Sound insulation enclosure


Download Product Brochure


"FOOKE has highly qualified specialists who develop very economical solutions and implement them punctually and accurately. I rarely experience anything like this".

Hans-Jochen Platte, Production Manager


For milling, drilling, spindling, cutting and sawing of workpieces made of carbon fiber reinforced plastics.

Workpiece carrier storage incl. retrieval device for automatic workpiece carrier replacement.

High-performance milling head extraction incl. explosion protection

Fully enclosed machine


Highest accuracy and excellent surface quality

"Compared to other milling machines we use, FOOKE machines are characterized by consistent, optimum geometric accuracy and the lowest percentage of unscheduled machine downtime. Even after more than 10 years of cooperation, FOOKE continues to convince and inspire us time and again".

Brandon Wenzlik, Prospect Mold



Profile milling machine ENDURA® PRO LINEAR

Specialist for stringer and profile processing
Highly dynamic 5-axis machining of long workpieces
Two-station component processing for loading and unloading parallel to the process
Encapsulated machining area by bullet-proof lamellas
Traverse paths up to 60,000 x 3,500 x 1,500 mm
Fully automatic movable clamping device / Flexible workpiece clamping
Typical sawing applications in profile processing
Rapid traverse: 65,000 mm/min.


Vehicle Design
Gantry milling machine ENDURA® 611Linear

Excellent surface quality with highly dynamic 5-sided machining of large 1:1 design models

Tool and mold construction
Compact gantry milling machine ENDURA® 704Linear

Highly dynamic finishing and high precision residual stock machining

CDM Tool & Manufacturing and FOOKE

"With the decision for a milling machine from FOOKE we have brought new momentum to our process. Less set-up time means more machining time. This enables us to carry out customer orders more economically and productively".

Mike Balderas, New Business & Marketing Manager



Plate milling machine ENDURA® 800LINEAR

Face milling machine for large aluminum precision plates
Finish machining in one milling process
Ergonomic loading
Surface quality < 0.4 µm
Milling tool up to Ø 3.100 mm


Rail Technology
Processing side walls, roofs and floor assemblies

Travelling column ENDURA® 1000LINEAR
Market leader in the processing of aluminum profiles in railway technology

Optionally with mechanical drive components or modern linear motor drives
Work area division - 3-place machining
Individual clamping concepts and fixtures on customer request
Operator's cabin for better process monitoring
Up to 90m X-travel




"We have been working with Fooke for almost 15 years in a trustful cooperation. The quality and reliability of the machines and the very good service still convince us today. From the preparation of the offer to process adjustments and final acceptance of the machines, everything always runs smoothly. Innovative technologies and very good expertise also reliably secure our production processes. We appreciate Fooke as a reliable and customer-oriented partner".

Dr. Philip Grothe, CEO


Do you have questions about our products

Our sales team is at your service

Feel free to mail us or call us. We look forward to your questions and suggestions. You will receive an answer as soon as possible.

Tel.: +49 (0) 2861 / 8009 - 222